Shopping Cart

SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller Stack

SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller Stack

$62.77 $125.53

SpeedyBee F7 Stack SPECIFICATIONSOrigin: Mainland ChinaModel Number: Speedybee-STACKMINICompatible Action Camera Brand: SpeedybeeBrand Name: RuncamParametersProduct NameSpeedyBee F7 Mini SpecsMCUSTM32F722IMU(Gyro)BMI270 for current batches; MPU6000 for old batches...

Description

SpeedyBee F7 Stack SPECIFICATIONS

Origin: Mainland China

Model Number: Speedybee-STACKMINI

Compatible Action Camera Brand: Speedybee

Brand Name: Runcam

Parameters

Product Name

SpeedyBee F7 Mini Specs

MCU

STM32F722

IMU(Gyro)

BMI270 for current batches; MPU6000 for old batches before May 2022.

USB Port Type

Type-C

Barometer

N/A

OSD Chip

AT7456Echip

BLE Bluetooth

Supported. Used for Flight Controller configuration(MSP should be enabled with Baud rate 115200 on UART 6)

Flash FC Firmware Wirelessly

Not supported. Please update firmware for this FC on the PC

Download/Analyze Blackbox

Not supported. Please download and analyze Blackbox data on the PC

DJI Air Unit Soldering Pads

Supported

Flash(for BlackBox)

8MB

Current Sensor

Supported, Scale=250 Offset=-500

BetaFlightCameraControlPad

Yes(CC pad)

Power Input

3S – 6S Lipo

5V Output

6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). Thetotal current loadis2.5A.

9V Output

2 groups of 9V output,thetotal currentload is2A.

3.3V Output

Supported. Up to 500mA current load.

ESC Signal Pads

M1- M4

UART

Full UART*3(UART1,UART2,UART3)

ESC Telemetry UART

R4(UART4)

I2C

Not supported

LED Pad

UsedforWS2812LED

Buzzer

BZ+andBZ-padusedfor5VBuzzer

BOOT Button

UsedtoenterDFUmode

RSSI Input

Not supported

SmartPort

Use any TX pad of UART for the SmartPort feature.

Supported Flight Controller Firmware

BetaFlight(Default), EMUFlight, INAV

Firmware Target Name

SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022.

Mounting

20 x 20mm, 3.5mm hole diameter

Dimension

30 x 30 x 7.5mm

Weight

5.7g

Product Name

SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs

Firmware

BLHeli_S JH40

Continuous Current

35A * 4

Burst Current

45A(5S)

ESC Protocol

DSHOT300/600

Power Input

3-6S LiPo

Power Output

VBAT

Current Sensor

Support (Scale=250 Offset=-500)

Mounting

20 x 20mm, 3.6mm hole diameter

Dimension

35 * 35 * 5.5mm

Weight

7g

SpeedyBee F7 Mini 35A StackTune FC + ESC without a PC for
your 2-4 quads

ESC SpeedyBee F7 Mini 35A Stack Tune FC + ESC without a PC for your 2-4″ quads Tf IR) Wireless full-featured flight controller tuning BLHeli_S ESC tuning Built-in Bluetooth 4.0 BLE chip .

Wireless full-featured flight controller tuningWireless full-featured BLHeli_S ESC tuningHigh-performance F7 flight controller CPUReal 35A BLHeli_S DSHOT600 ESCBuilt-in Bluetooth 4.0 BLE chip


the SpeedyBee app lets you connect your quad to the PC wirelessly . you can even tune your ESC with the speedybee app.

Too difficult to access the
USB port on your compact
2-4″ quad? Say goodbye!
It’s time to say goodbye to this trouble! With this Bluetooth
stack, you don’t need to connect your quad to the PC for
FC and even ESC tuning, everything can be done
wirelessly in the SpeedyBee app.

Tune Flight controller
and ESC wirelessly!
Power the quad, connect the SpeedyBee app via
Bluetooth, configure the UART Ports,PID,OSD and
every other settings on this flight controller Also,
every parameter of the BLHeli_S ESC in this
stack can be set via the app.

Tune Flight controller and ESC wirelesslyl Power the quad, connect the SpeedyBee app via Bluetooth, configure the UART Ports, PID, OSD and every other settings on this flight controller . also, every parameter of the BLHeli_ S ESC in this stack can be set via the app .

Change motor directions
wirelessly!
With this stack, when you finish your build, connect to the
SpeedyBee app, change the motor directions just in
a few simple steps. Then take off.

connect to the SpeedyBee app; change the motor directions just in a few simple steps . then take off J21 Gyro Gps CPu Tap the On the Idle .

Flash Blue Jay firmware for
the ESC wirelessly!
You are a big fan of Blue Jay ESC firmware, because it supports
48k/96k PWM frequency and Bidirectional Dshot? No problem,
the ESC of this stack is loaded with latest Blue Jay firmware.

blue ESC firmware supports 48k/96k PWM frequecny and Bidirectional Dshot . the ESC of this stack is loaded with latest Blue Jay firmware . #Ncte: During the firmware flag ann don’t qult the app, otherw Jay .

Support DJI Digital
Video transmitter.
The flight controller has two
independent 9V 2A BEC and
5V 2A BEC, supports various
analog image transmissions
above 5V, and also supports
DJI Air Unit and Vista.

real 35A ESC, no false labeling! 4-channel continuous 140A output can reach 30 seconds*

Real 35A ESC, no false labeling!6-layer 2oz PCB plus optimized circuit design equals stable
and strong current output. The four-channel continuous
140A output can reach 30 seconds.

Soee0 bee 35minias 2 Omm 2Omm 7.Smm 5.Smm 6.Smm 8.Smm 9.Smm 10.Smm 11.Smm 12.Smm 13.Smm 03.Smm 3.6mm

Reviews (0)

Add a Review

Your email address will not be published. Required fields are marked *