SpeedyBee Adapter 3

Description

Specifications

Package1 x Adapter 3
1 x Manual CardSpeedyBee Adapter 3 VS SpeedyBee Adapter 2 VS OTG

Details

NO LAPTOP, NO POWER BANK, AND NO LIPO
CHECKER IN YOUR FPV BAG.Turn your smartphone into
your mobile FPV companionConnect to the SpeedyBee mobile app, and configure
your flight controller anytime, anywhere. Or flash the
latest version of Betaflight/Emuflight/INAV in just
2 minutes before your flight session.
The choice is yours.Analyzing Blackbox data has
never been easierNo laptop, no separate app, no hassle. Connect your
quad to the SpeedyBee mobile app and analyze your
Blackbox data* in just 1.5 minutes after a flight.
Get the most out of your practice sessions now.*Currently supports Betaflight and Emuflight onlyYour LiPo batteries =
Powerful 30W power banksConnect SpeedyBee Adapter 3 to a LiPo battery and
charge your mobile phone* and tablets when you
need them the most. Supports mainstream
QC3.0/AFC/Apple 2.4A (iPhone 6s and above)
and other fast charging protocols with charging
power up to 30W. Complete with over-current
protection, short-circuit protection and
over-temperature protection to protect
your gadgets from unwanted accidents.

*Charging function requires 2S LiPo and above.Forgot your LiPo checker?
Worry notConnect your 1S – 6S LiPo and the display will
immediately show your battery voltage and the
remaining power with a specific colour code*.
The built-in beeper will alert you if the remaining
power is less than 40% to help extend your
battery lifespan.*GREEN(>80%), WHITE(40-80%) and RED(MicroUSB or Type C?
Why not both?SpeedyBee Adapter 3 comes with a dual-head data cable,
with MicroUSB 2.0 and USB 3.0 Type C connector
on each end. No more worries about connector
compatibility regardless of what flight controller
you are using in your build.WiFi + Bluetooth =
the best of both worldsUse Bluetooth for quick access to
your firmware configurator,
or switch to Wi-Fi to flash
firmware or download
Blackbox data at a
higher speed.And all you need
is just one LiPoAccess the configurator function using any LiPo
batteries available to you. Supports all 1S – 6S LiPo
with PH2.0 or XT60 connectors. Plug in that
beefy 6S 1500mah, or that tiny 1S Whoop battery
(minimum voltage 3.8V), to the
SpeedyBee Adapter 3
you are ready to
access the
configurator.

When using a BT2.0 battery to power the SpeedyBee Adapter 3 via the PH2.0 port, please ensure the polarity is correct (left for + and right for -). Incorrect polarity may cause Adapter 3 to be damaged.

Manual

Manual(EN)Manual()